Top-Suspended Centrifuge Sealing Ring

The top-suspended centrifuge sealing ring is a static sealing wear part, mainly at the housing door cover, discharge port, manhole, and flanges, with some as auxiliary seals at the main shaft. It seals the centrifuge chamber, prevents mother-liquor leakage and air ingress, and ensures closed production, vacuum, and explosion-proof operation in sugar processing.

Sand Removal Hydrocyclone Conical Separator Liner

Internal wear-resistant wear part fitted inside hydrocyclone conical shell, key component enduring sand-particle scouring during solid-liquid separation duties.

Sand Removal Hydrocyclone Sand Discharge Valve Sealing Assembly

Wear part at bottom discharge port of desanding hydrocyclone, assembled inside sand-discharge valve body for port sealing duties.

Sand Removal Hydrocyclone Main Body Sealing O-ring

Static-seal wear part installed at mating-flange faces of hydrocyclone cylinder, cone and other main-body segments.

Destoner Bearing

Rotary-support wear part for vibratory destoner, mounted within eccentric vibration mechanism or transmission-shaft assembly to support exciter-shaft rotation.

Destoner V-Belt

Transmission-system wear part fitted between motor pulley and unit exciter pulley, transfers power to drive destoner vibration mechanism.

Top-Suspended Centrifuge Coupling Rubber Column

Elastic transmission wear part installed between motor and main-shaft coupling halves, acting as flexible shock-absorbing connector.

Top-Suspended Centrifuge Buffer Rubber Ring

Vibration-damping elastic wear part. Typically fitted on machine base, vibration-isolation support or housing limit stops for whole-machine shock-absorption duties.

Top-Suspended Centrifuge Upper Bearing

Upper main-shaft support wear part, housed inside top-end bearing seat of centrifuge main shaft, supports rotation of overhung spindle assembly.

Top-Suspended Centrifuge Lower Bearing

Auxiliary lower-main-shaft support wear part fitted inside bottom-end bearing seat, works jointly with upper bearing to constrain spindle motion.