Cooling Jacket for Crystallizer

A heat exchange structure on the outer wall of the crystallization tank. Refrigerant is circulated through it to remove heat and achieve cooling and crystallization of the material liquid.

Mixer Reducer

A speed reduction component for crystallizer agitation. It reduces motor speed and increases torque to drive the mixing impeller.

Stirring Shaft

Main drive shaft for crystallizer agitation. It transmits torque from the reducer to rotate the impeller blades.

Crystallizer Sight Glass

Observation assembly for the crystallizer for visual inspection of material crystallization status inside the tank.

Wall Scraper

Internal crystallizer component that scrapes off crystalline deposits adhering to the tank wall as the agitator rotates.

Temperature Sensor

Temperature sensing element for the crystallizer. It detects real time liquid temperature inside the tank and feeds signals back to the control system.

Circulating Water Valve

Control valve for jacket circulating water of the crystallizer, used to regulate refrigerant flow rate.

Insulation Layer

Thermal insulation protective layer wrapped externally around the crystallizer jacket to reduce cold energy loss.

Seed Crystal Hopper

Hopper assembly for seed crystal feeding on the crystallizer. It pre stores seed crystals and feeds them quantitatively into the crystallization tank.

Discharge Valve

Bottom mounted valve for the crystallizer for material discharge, suitable for crystalline suspension slurry.

Cooling Water Distributor

Cooling water distribution component for crystallizer jacket, realizing uniform water distribution for consistent heat exchange.

Explosion Proof Motor

Explosion proof electric motor for safe operation in crystallization workshops with flammable dust and gas, eliminating ignition explosion risks.